|
概述：
The FTIR-OEM100 is an infrared detector module designed to operate in conjunction with the FTIR-OEM000 interferometer module. The detector module has internal optics to focus a collimated baem onto the detector active element. The 2-stage cooling of the MCT detector is driven by a PTEC controller and 4 different gain levels can be adjusted on the detector amplifier. Detectors with spectral ranges up to 12 microns are available.
規(guī)格參數(shù)：
|
Detector type |
Photovoltaic MCT (Mercury-Cadmium-Telluride) |
|
Detector active size |
1mm |
|
Focusing optics |
Off-axis parabola, f=17mm |
|
Input aperture diameter (optical) |
12.7mm |
|
FOV (half angle) |
28mrad |
|
Cooling |
2-stage TEC, with built-in TEC controller |
|
Amplifier |
Transimpedance amplifier, 4 gain levels selectable via I2C bus |
|
Preamplifier bandwidth |
0-20kHz |
|
Power supply |
7.5V / 1.5A |
|
Dimensions |
93mm x 75mm x 66mm |
|
Weight |
500g |
Detector spectral ranges & sensitivity：
Detectors with different spectral ranges are available. When choosing, please consider that shorter cut-off detectors offer a better sensitivity. Note that detectors with different spectral ranges or with more cooling stages are available on request.
|
Product code |
FTIR-OEM100-20-060-
2TE |
FTIR-OEM100-20-090-
2TE |
FTIR-OEM100-20-120-
2TE |
|
Detector range[μm] |
2-6 |
2-9 |
2-12 |
|
Detector rang[cm-1] |
5000-1700 |
5000-1100 |
5000-830 |
|
Peak D*
[cm Hz1/2 W-1] |
>1.0x1011
|
>2.5x109
|
>1.5x109
|
|
