|
我們的主要產品是波長從650nm到1620nm具有不同譜帶的單模尾纖SLD模塊。
我們正在為不同的應用制造制冷(有制冷器和電熱調節器)和非制冷的模塊，像光纖陀螺儀、OCT、光纖組件測試、光計量學和大量的其它模塊。我們也提供自由空間模塊，特別是用于原子力顯微術，但也包括無斑紋照明、白光干涉測量、光學試驗和測量以及其它模塊。
Model number：SLD-34-HP
特征：
- very wide bell-shaped optical spectrum
- no sidelobes in the coherence function
- negligible residual Fabry-Perot modulation depth
- internal PD monitor
- FC/APC terminated pigtails
封裝：
- fiber coupled – Butterfly, DIL
- free space – TOW
應用：
- high resolution OCT
- fiber sensors
- Bragg grating sensors
- optical measurements
Additional and customized:
- PM pigtails (slow axis alignment; 45 degree orientation upon request)
- 4-mW SMF model with reduced sensitivity to feedback
技術指標
|
Parameter |
Category |
Min |
Typ. |
Max |
|
Output power, mW, SM fiber pigtail, SLD-341
|
HP1 |
6.0 |
8.0 |
- |
|
HP2 |
15.0 |
20.0 |
- |
|
Output power, mW, Glass window SLD-340
|
HP1 |
12.0 |
16.0 |
- |
|
HP2 |
30.0 |
40.0 |
- |
|
Forward current, mA
|
HP1 |
- |
200 |
260 |
|
HP2 |
- |
260 |
300 |
|
Forward voltage, V |
All |
- |
- |
2.8 |
|
Central wavelength, nm
|
SLD-34 at 810 |
All |
800 |
810 |
820 |
|
SLD-34 at 840 |
All |
830 |
840 |
850 |
|
SLD-34 at 860 |
All |
850 |
860 |
870 |
|
SLD-34 at 880 |
All |
870 |
880 |
890 |
|
SLD-34 centered at 810 nm |
|
Spectrum width, FWHM, nm
|
HP1 |
25 |
30 |
- |
|
HP2 |
20 |
25 |
- |
|
SLD-34 centered at 840 nm |
|
Spectrum width, FWHM, nm
|
HP1 |
35 |
40 |
- |
|
HP2 |
30 |
35 |
- |
|
SLD-34 centered at 860 nm |
|
Spectrum width, FWHM, nm
|
HP1 |
40 |
45 |
|
|
HP2 |
35 |
40 |
|
|
SLD-34 centered at 880 nm |
|
Spectrum width, FWHM, nm
|
HP1 |
45 |
50 |
|
|
HP2 |
40 |
45 |
|
|
Residual spectral modulation depth, % |
All |
|
2.0 |
5.0 |
|
Secondary coherence subpeaks (Reflectivity),dB (10 log) |
All |
- |
-25 |
- |
|
Slow / fast polarization ratio
(PM modules)*, dB |
All |
- |
10.0 |
- |
|
Operating temperature °C |
All |
-55 |
- |
+70 |
|
Cooler current, A |
All |
- |
- |
1.2 |
|
Cooler voltage, V |
All |
- |
- |
3.5 |
* Pseudo-depolarized versions (light is launched into the fiber with its
polarization oriented at 45° to the birefringent axes) are available upon request
The following part numbers should be used for ordering:
SLD-34(a)-(b)-(c)-(d)-(e)-(f),
where: a – 0 (free space) or 1 (fiber pigtailed),
b – power category (HP1, HP2), c – package type,
d – SM (isotropic) or PM (polarization maintaining) fiber (pigtailed versions only),
e – PD (if PD monitor is required), f – central wavelength.
Example: SLD-341-HP2-DBUT-SM-PD-840.
A maximum feedback of 10-3 is allowed to run HP series SLDs safely at full power. |
