670nm光纖耦合SLD模塊/670nm SLD模塊
我們的主要產品是波長從650nm到1620nm具有不同譜帶的單模尾纖SLD模塊。
我們正在為不同的應用制造制冷(有制冷器和電熱調節器)和非制冷的模塊，像光纖陀螺儀、OCT、光纖組件測試、光計量學和大量的其它模塊。我們也提供自由空間模塊，特別是用于原子力顯微術，但也包括無斑紋照明、白光干涉測量、光學試驗和測量以及其它模塊。
Model number：SLD-261-MP
特征：
- visible 670 nm band SM fiber coupled SLD modules
- flat spectrum with negligible residual Fabry-Perot modulation depth
- maximum parasitic secondary coherence subpeaks intensity below -20 dB (10 log), maximum below -30 dB upon request
應用：
- atomic force microscopy
- optical sensors
- optical coherence tomography
- optical measurements
- others
封裝：
- fiber coupled – DIL, Butterfly; uncooled “minibut” packages available upon request
|
Parameter |
Device |
Min |
Typ. |
Max |
|
Output power, mW, SM fiber pigtail
|
MP1 |
0.5 |
- |
1.0 |
|
MP2 |
1.0 |
- |
2.0 |
|
Forward current*, mA |
All |
- |
- |
160 |
|
Forward voltage, V |
All |
- |
- |
3.0 |
|
Central wavelength**, nm |
All |
660 |
670 |
690 |
|
Spectrum width, FWHM, nm |
All |
6.0 |
7.5 |
- |
|
Residual spectral modulation depth***, % |
All |
- |
1.0 |
2.0 |
|
Secondary coherence subpeaks***,dB (10 log) |
All |
- |
-25 |
-20 |
|
Slow / fast polarization ratio ****
(PM “polarized” modules), dB |
All |
7.5 |
10 |
- |
|
Operating temperature range***** (case),°C |
All |
-55 |
- |
+80 |
|
PD monitor photocurrent, μA |
MP1 |
50 |
- |
- |
|
PD monitor photocurrent, μA |
MP2 |
100 |
- |
- |
|
Cooler current, A |
All |
- |
- |
1.2 |
|
Cooler voltage, V |
All |
- |
- |
3.5 |
* It is not allowed to exceed maximum output power or maximum drive
current, whatever happens first
** Center wavelength 670 nm is not guaranteed. Contact Company
representative if you require a tighter tolerance of center wavelength.
*** Rated at minimum power, not guaranteed at maximum power of a
particular power category
**** Pseudo-depolarized versions (light is launched into the fiber at 45 degrees
to the birefringent axes) are available upon request
***** Butterfly packaged SLDs
Additional & customized:
- FC/APC termination of fiber pigtail
The following part numbers should be used for ordering:
SLD-261-MP(a)-(b)-(c)-PD,
where:
a – power category (MP1 or MP2),
b – package type (DIL, DBUT, SBUT),
c – type of fiber — SM (isotropic) or PM (polarization maintain).
Example: SLD-261-MP1-DIL-SM-PD.
|
